NanoPhos introduces the new SurfaFix range of sealing products, which includes polyurethane foams, anti-mold silicone and acrylic paintable putty. SURFAFIX Standard Polyurethane foam, in spray, for sealing, assembly, filling, insulation and installation of structural elements. It is used in a wide range of applications, while it has excellent adhesion to all building materials, except Teflon, silicone and polyethylene. It ensures good thermal and acoustic insulation. It is resistant to water and aging. Special composition for sealing, assembly, insulation and installation of structural elements. Excellent adhesion to different structural elements, with a wide range of applications Thermal and acoustic insulation High resistance to water and aging 500ml & 750ml packages available SurfaFix Foam Low Expansion Low Swell Polyurethane Hand Foam. For fixing, gluing and sealing structural elements such as windows, stairs, decorative plasterboards, doors, slats and shelves. It exhibits excellent adhesion to all building materials except PTFE, silicone and polyethylene. After application, the foam expands very little and is therefore suitable for applications where the expansion of the foam must remain controlled. Allows easy gluing even on uneven surfaces. It ensures fast execution of projects and economy in consumption. Excellent adhesion to all building materials. After application, the foam swells slightly. Easy to use with quick replacement of the container. It does not leak from the nozzle. 750ml packaging available SURFAFIX Acryl Universal Acrylic, paintable Putty, for sealing porous building materials. Acrylic, paintable Putty, for sealing porous building materials (bricks, concrete, plasterboard, ceramic tiles, etc.) that are exposed to minor stresses (e.g. window frames, doors, holes in walls, etc.). Excellent adhesion to porous materials, paintable. Suitable for repairing smaller holes in walls. Does not slip in vertical joints. Particularly resistant to weather conditions, sunlight and aging. Special composition without containing solvents. Excellent sealing of porous building materials. Can be painted. Does not slip in vertical joints. Contains no solvents. Resistant to weather conditions and solar radiation 280ml packaging available Available in white and transparent SURFAFIX Sanitary Acetate Anti-mould Silicone, for sealing materials & joints. Anti-mould Silicone for sealing materials and joints that are not subject to heavy loads, glass surfaces in aluminum frames, for installing glass and for installing glasses with a perimeter support guide, etc.). Prevents mold formation. Excellent adhesion to materials such as aluminum, ceramics, glass, porcelain. Permanently elastic sealant, resistant to a wide range of chemicals and aging. Does not slip in vertical joints. After curing, it exhibits excellent mechanical properties .  Prevents mold formation Excellent sealing & adhesion to building materials and joints. It maintains its elasticity. Does not slip in vertical joints. Resistant to a wide range of chemicals. 280ml packaging available Available in white and transparent

The company NanoPhos AE  joined the “Digital Step” action with a budget of 84 million Euros.  The Action aims at the digital upgrade of very small, small and medium enterprises. The business plan that was approved for financing and is being implemented includes investments in the following categories: Supply, transport, installation and operation of new machines and other ICT equipment Supply of specialized software, office applications, website development, e-shop services, etc. Other Digital Services (digital advertising, digital security policy certification, registration and data transfer, etc.) Employee payroll costs Through participation in the Action, the business achieved: improving its competitiveness increasing its profitability enhancing extroversion strengthening entrepreneurship creating / maintaining quality jobs

Action title: Business Development and Innovation Plans for sustainable constructions, buildings, infrastructures Transaction acronym: SSK eCODOMH-B2B Action description: The e-CoDOMH “Innovation Cluster for Sustainable Constructions, Buildings, Infrastructures”, supported by EBETAM, initial members 17 innovative, dynamic businesses in the sector and scientific support from Research Organizations, has as its vision the upgrading of entrepreneurship in Greek sector of building materials and constructions and the consequent achievement of a competitive advantage at European and international level. The object of the proposed Project “Operational development and innovation plans for sustainable constructions, buildings, infrastructures” is the development and implementation of operational plans, which are part of two priority axes of the eCODOMH GCC: environmental sustainability – with an emphasis on energy upgrading – and digitization of production . Business plans constitute a coordinated effort to address modern challenges and the technological transformation of construction. Thus, the Project is perfectly aligned with the vision and strategic goals of the e-CODOMH GCC, promoting the flagship project “The building of 2030”. The proposed actions are fully aligned with the FA Proposal, where the investigation and determination of research and development priorities, the implementation of research & development project planning actions, information and formulation of proposals as well as the dissemination & exploitation of results, have been described as distinct goals. Project budget: €1,695,630.39 Duration of project implementation: 18 months Sponsor: • EBETAM S.A Implementation Coordinator: • PRIME LASER TECHNOLOGY SA Implementation Bodies: • FIBRAN • NORDIA • STAGAKIS • ERKAMYL • ili-Con PC • Tritoxo Project Management • DOMECON ENGINEERING & CONSULTING • ATEBE TECHNICAL DEVELOPMENT • Core Innovation • Seven Sigma PC • NANOPHOS AE Source of Funding: The project is implemented within the framework of the Action “COOPERATIVE INNOVATION FORMATIONS/SCC” in the Thematic Sector “MATERIALS, CONSTRUCTION & INDUSTRY” and is co-financed by the European Regional Development Fund (ERDF) and by National Resources within the Operational Program “Competitiveness, Entrepreneurship and Innovation (EPANEK)” of the NSRF 2014-2020 (Project code: ΓΓ2CL-0348775).

No products were found for this query. Enormous amounts of thermal energy are easily transferred through the roof , resulting in large amounts of energy being required to heat and cool the building. In addition, water seeps into the building from parts of the roofs where the insulating materials have failed, creating dampness and mold in the interior walls and ceilings. The bitumen waterproofing solution created enormous problems in the insulation of roofs: a) it collects the incident heat radiation and heats the buildings, b) the stains are obvious and the failure at the joints of the bitumen and parapets or between the bitumen rolls leads to the complete failure of said insulation system. The same can be true of old polyurethane systems that turn yellow over time and crack due to water containing atmospheric contaminants. A system that can adhere to old polyurethane and tarps and repair cracked, yellowed surfaces that are difficult to achieve is the NanoPhos system. Surfa Pore® FX | for waterproofing and stabilization of loose cementitious substrates (if required) Surfa Mix® P or Universal Primer or Epoxy Primer WB | to prepare the application surface (depending on the existing substrate) Surfa Paint® Elastomeric Hellas Cool White or Elastomeric Roof Hybrid | final coating to waterproof the surface Surfa Shield® C | for the self-cleaning of the final surface through photocatalysis ( optional ) Application Tips: New cement substrates should be cured for more than 3-4 weeks before applying the primer. Make sure the roof is dry and free of mold, dirt, dust, oily residue or materials from previous applications. Apply Surfa Pore® FX by brush, roller or simple sprayer and let it dry for a day. SurfaPore FX WB should only be applied to cementitious substrates. Apply one of the Surfa Mix® products as a primer , depending on the existing substrate. For more technical clarifications, you can contact the Technical Department of NanoPhos. Apply Surfa Paint® Elastomeric Hellas Cool White or Elastomeric Roof Hybrid, two coats, crosswise using a sprayer or roller. Make sure the edges and corners are completely covered. The application surface should be covered crosswise (horizontally and vertically) to ensure even application. Additional coats should be applied 24 hours after the previous application. Following the application of the sealant, it is recommended to optionally apply Surfa Shield® C using a simple sprayer. Maximum effectiveness is achieved 24 hours after application.